I/R Remote Control Receiver Module for Arduino


I/R Remote Control Receiver Module for Arduino
Stock Number: 31945 MP
 Review Average:  
 Number of Reviews: 1
 View ReviewsReview this item
$1.95


This item is NO LONGER available. Please use our SEARCH feature and see if you can find an alternate item for what you were looking for.
This item is no longer available


SHARE
    
     Email this to a friend     

Detailed Description

IR module for Arduino, Rasberry-Pi & Other Controllers
Mini receiver module using the VD1838B I/R Digital receiver. Designed for remote control systems with the opto PIN diode, pre-amp, filtering, demodulator in one small package. Uses 1 pin of the microcontroller GPIO.
Code libraries, applications and Information & Freeware available through: www.arduino.cc.en, www.raspberrypi.org and others
Power: 5VDC
Frequency: 38KHz
I/R Wavelength: 940nM
Output: TTL compatable Data, Current Sink
Connection: 3 Pin .1in. Pitch Header
Data I/R signal should follow the following guidlines
Burst length: >6 Cycles
Gap Length: >9 Cycles (>14ms) at least every 90ms
Data Format: Transmitter/Controller dependant
L: 7/8” W: 3/8” HT: 1/2” WT: .002

View PDF Data Sheet


California Proposition 65 Warning WARNING: This product can expose you to chemicals including Nickel which is known to the State of California to cause cancer and which is known to the State of California to cause birth defects and/or other reproductive harm. For more information, go to www.P65Warnings.ca.gov



 Product ReviewsClick here to review this item
perfect I/O module
This I/O module has been the only one that actually works with my arduino and it is pretty accurate
 

Recently Viewed Items